Standards list

Click here to purchase
This standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection and test requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves.

The following two categories of butterfly valves are included.

a) Category A–Manufacturer’s rated cold workingpressure (CWP) butterfly valves, usually with aconcentric disc and seat configuration. Sizes coveredare NPS 2 to NPS 48 for valves having ASME Class125 or Class 150 flange bolting patterns.

b) Category B–ASME Class and pressure-temperaturerated butterfly valves that have an offset seat andeither an eccentric or a concentric disc configuration.These valves may have a seat rating less than thebody rating. Sizes covered are listed below.

• For lug and wafer, Class 150: NPS 3 to NPS 48.
• For lug and wafer, Class 300 and Class 600: NPS 3 to NPS 48.
• For double-flanged long pattern, Class 150, 300, and 600: NPS 3 to NPS 36.
• For double-flanged short pattern, Class 150 and Class 300: NPS 3 to NPS 48.
• For double-flanged short pattern, Class 600: NPS 3 to NPS 24.

Valve configurations include double flanged, lug- and wafer-type with facings that permits installation between ASME and MSS flanges that conform to the standards and specifications listed in Section 2. Typical valve construction and nomenclature for valve parts are shown in Annex C.

Product Details

Edition:

8th

Published:

02/01/2016

Number of Pages:

36

File Size:

1 file , 780 KB

Redline File Size:

2 files , 4.6 MB

Product Code(s):

C60908, C60908, C60908

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria

Click here to purchase

This standard covers design, materials, face-to-face dimensions; pressure-temperature ratings; and examination, inspection, and test requirements for gray iron, ductile iron, bronze, steel, nickel-base alloy, or special alloy butterfly valves that provide tight shutoff in the closed position and are suitable for flow regulation.

Product Details

Edition:

6th

Published:

05/01/2004

Number of Pages:

13

File Size:

1 file , 220 KB

Product Code(s):

C60906, C60906R, C60906R, C60906, C60906, C60906R

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria

Click here to purchase
This standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection and test requirements for gray iron, ductile iron, bronze, steel, nickel-based alloy, or special alloy butterfly valves that provide tight shutoff in the closed position. The following two categories of butterfly valves are included.

Category A-Manufacturer’s rated cold working pressure (CWP) butterfly valves, usually with a concentric disc and seat configuration. Sizes covered are NPS 2 to NPS 48 for valves having ASME Class 125 or Class 150 flange bolting patterns.

Category B-ASME Class and pressure-temperature rated butterfly valves that have an offset seat and either an eccentric or a concentric disc configuration. These valves may have a seat rating less than the body rating. For lug and wafer, Class 150, 300, and 600, sizes covered are NPS 3 to NPS 24. For double flanged long pattern, Class 150, 300, and 600, sizes covered are NPS 3 to NPS 36. For double flanged short pattern, Class 150 and 300, sizes covered are NPS 3 to NPS 48. For double-flanged short pattern, Class 600, sizes covered are NPS 3 to NPS 24.

Product Details

Edition:

7th

Published:

10/01/2009

Number of Pages:

30

File Size:

1 file , 480 KB

Redline File Size:

2 files , 930 KB

Product Code(s):

C60907, C60907C, C60907C, C60907, C60907C, C60907

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria