TAPPI T 491 om-23
Click here to purchase This test is applicable to paperboards that are medium-sized, with an immersion number between 4.5 and 6.0, to hard-sized, with an immersion number of 3.5 or less, throughout. Product Details Published:…
NBBI NB23-2023
Click here to purchase It is the purpose of the National Board Inspection Code (NBIC) to maintain the integrity of pressure-retaining items by providing rules for post-construction activities including installation, and by providing rules for…
TAPPI TIP0404-19
Click here to purchase The use of instrumentation and other techniques for monitoring and troubleshooting paper machine press sections is widely accepted. High energy costs and the overall requirement to produce at a lower cost…
NACE No. 4 – SSPC SP7
Click here to purchase NACE/SSPC Joint Surface Preparation Standard. Revised in 2000. Presents requirements for brush-off blast cleaning of steel surfaces by the use of abrasives. Defines brush-off blast cleaning and includes sections on procedures…
TAPPI T 263 sp-23
Click here to purchase This method deals with the identification of wood from conifers and also permits determination of the coniferous origin of fibers in pulp and paper. The majority of the species described are found…
CLSI NBS02-Ed3
Click here to purchase This guideline describes the basic principles, scope, and range of follow-up and education activities within the newborn screening program and system. Product Details Edition: 3rd Published: 04/01/2023 ISBN(s): 9781684401819 Number of…
IPC A-42-K
Click here to purchase Artwork required for certification to either MIL-P-50884, MIL-P-55110, also IPC-6011, IPC-6012, IPC-6013, and IPC-MC-324. Includes Master Drawing #100042 (2 pcs. 30 x 46 cm 1:1). Available in film and electronic format…
NACE TM0286-94
Click here to purchase This standard describes a multple-tube test heat exchanger that can be used by process industry facilities to monitor corrosion and fouling control in cooling tower water systems. Methods for collecting test…
NACE TM0187-2003
Click here to purchase This standard establishes a test method to measure the ability of elastomeric materials to withstand static exposure to elevated pressure and vapor phase sour gas environments, e.g., gaseous hydrocarbons with hydrogen…